TDB , RADIUS & ANGLE DRESSER

Categories

cart (0)

Home > Grinder and Tooling >

Our Price: $960.00

Stock Status:In stock

Part Number: TDB

Qty:

Description

Description

Radius and Angle Dresser
Radius and Angle Dresser

Main Features

1. Positive setting of the diamond to absolute center with the special gage included with the dresser.;
2. Simple, fast, accurate radius setting; no height gage or other set-up aids required.
3. Radius is set on the grinder by measuring over the two pins or by inserting a gage block,as shown, for direct reading. 4. Inside or outside radius is determined
simply by sliding the dowel pin to the right for concave and to the left for convex.;
5. 4x90o graduation in full 360o circle. 6 minute vernier reading.
6. Chrome plated.;
7. One push-pull type knob for radius and angle control and for safer and faster operations.;
8. Accuracy. Extremely close tolerances are held in the manufacture of this tool, assured by hardening and precision grinding of all critical parts.
9. Ways are chrome hardened.;
10. Economy.
11. Set-up and dressing time reduced to a
bare minimum due to simplicity.

Part Number :TDB

Max. Wheel Diameter Stand	10"
Internal Radii	5/8~1-5/8 inch
with Rat-Tail Adapter	1/32~1-5/8 inch
External Radii	0~1-5/8 inch
Height from Base to Center	4-3/32 inch
Tangent travel/either side of center	1-5/8 inch

You may also like...

DS-010L: DS-010L , DIAMOND NIP 1/4'X3.15' 0.2CT for the FC-350 Punch Former

Our Price: $45.00

Add

DS-010L: DS-010L , DIAMOND NIP 1/4'X3.15'
0.2CT for the FC-350 Punch Former

Browse for more products in the same category as this item:

Grinder and Tooling
Grinder and Tooling > Grinder Accessories
Grinder and Tooling > Grinder Accessories > Fixture/ Dresser